Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
MOBIL 1 ESP X1 0W-30 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters (CAT's). MOBIL 1 ESP X1 0W-30 has been designed to help deliver outstanding performance and protection in conjunction with potential fuel economy benefits.
Key features and potential benefits include:
Features Advantages and Potential Benefits Low Ash Content Helps to reduce particulate build up in Diesel Particulate Filters Low Sulfur and Phosphorous content Helps to reduce poisoning of Gasoline Catalytic Converters Active cleaning agents Helps to reduce deposits and sludge build-up to enable long and clean engine life Low oil consumption Less hydrocarbon pollution Enhanced frictional properties Potentially aids fuel economy Excellent low temperature capabilities Quick cold weather starting and ultra-fast protection Helps to extend engine life Outstanding thermal and oxidation stability Helps to reduce oil aging allowing extended drain interval protection
Applications & Uses
- Markets
- Applications
- Application Area
- Product Application
MOBIL 1 ESP X1 0W-30 is recommended for many types of modern automobile engines, especially the high-performance gasoline and diesel
engines found in the latest passenger cars, SUVs and light vans.MOBIL 1 ESP X1 0W-30 is especially suitable for extreme conditions, where conventional oil often may not perform. It is not recommended for 2-
Cycle or aviation engines, unless specifically approved by the manufacturer.
Properties
- SAE Viscosity Grade
- Typical Properties
Value Units Test Method / Conditions Ash Content (Sulfated) 0.8 mass % ASTM D874 Density (at 15.6°C) 0.847 g/cm³ ASTM D4052 High Temperature High Shear Viscosity (at 150°C) 3.5 mPa.s ASTM D4683 Kinematic Viscosity (at 100°C) 12 mm²/s ASTM D445 Kinematic Viscosity (at 40°C) 35 mm²/s ASTM D445 Mini-Rotary Viscometer Yield Stress (at -40°C) 24800 Pa ASTM D4684 Phosphate Content 0.08 mass % ASTM D4951 Total Base Number 7.6 mg KOH/g ASTM D2896 Viscosity Index 180 - ASTM D2270