Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
Features Advantages and Potential Benefits Outstanding Keep Clean Performance Reduced system deposits and sludge to help protect equipment and extend equipment life, reduce maintenance costs and improve total system performance Enhanced Anti-wear Performance Meets or exceeds major pump manufacturer requirements, helps extend component life Exceptional Thermal and Oxidation Stability Helps reduce maintenance downtime and costs by contributing to system cleanliness and deposit reduction even under harsh conditions Enhanced Corrosion Protection Helps ensure protection with a wide variety of component metallurgy Controlled Demulsibility Protects systems from small and large quantities of water and helps extend filter life Quality Reserve Maintains performance features even under severe service conditions and extended drain intervals
Applications & Uses
- Markets
- Applications
- Application Area
- Product Application
- Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products.
- Hydraulic systems requiring a high load-carrying capability and anti-wear protection, and when thin oil-film corrosion protection is an asset.
- Where small amounts of water are unavoidable.
- Systems containing gears and bearings.
- Machines employing a wide range of components using various metallurgy.
Properties
- ISO Viscosity Grade
- Typical Properties
Value Units Test Method / Conditions Copper Strip Corrosion Rating (at 100°C, 3 h) 1A - ASTM D130 Density (at 15.6°C) 0.8596 kg/I ASTM D4052 Emulsion Time (at 54°C, 3ml) 20 min ASTM D1401 FZG Scuffing Test (A/8.3/90, Failure Stage) 11 - ISC 14635-1 Flash Point 231 °C ASTM D92 Foam (Sequence I, Stability) 0 ml ASTM D892 Foam (Sequence I, Tendency) 10 ml ASTM D892 Foam (Sequence II, Stability) 0 ml ASTM D892 Foam (Sequence II, Tendency) 10 ml ASTM D892 Foam (Sequence IIl, Stability) 0 ml ASTM D892 Foam (Sequence IIl, Tendency) 10 ml ASTM D892 Kinematic Viscosity (at 100°C) 5.8 mm²/s ASTM D445 Kinematic Viscosity (at 40°C) 33.4 mm²/s ASTM D445 Pour Point -36 °C ASTM D97 Total Acid Number 0.7 mg KOH/g ASTM D664 Viscosity Index 115 - ASTM D2270
Regulatory & Compliance
- Quality Standards