Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
Mobil DTE 700 Series offers the following features and potential benefits:
Features Advantages and Potential Benefits Meets or exceeds most major turbine equipment builderspecifications and industry specifications (ISO VG 32) Simplifies lubricant selection and application / Assures compliance withequipment builder's warranty / Minimizes lubricant inventory Superior oxidation, chemical and color stability Designed to provide extended oil charge life and help reduce oil purchases anddisposal costs Helps control deposit formation to help reduce filter plugging and equipmentfouling for reducing downtime and maintenance costs High level of turbine system reliability and reduced unscheduled downtime Excellent water separability Helps to insure good lubrication film to protect turbine bearings / Maximizeswater removal system efficiency and minimizes oil replacement costs Enhanced rust and corrosion protection Prevents corrosion of critical oil system components for reducing maintenanceand prolonging component life Rapid air release and resistance to foaming Prevents erratic operation and pump cavitation, reducing pump replacement andincreasing pump efficiency Zinc Free Reduces environmental impact
Applications & Uses
- Markets
- Applications
- Application Area
- Product Application
MOBIL DTE 732 are designed to meet or exceed the requirements of circulation systems of steam and gas turbines. Specific applications include
- Electric power generation for high output base load utilities
- Gas Turbine Combined Cycle Power Plants operating in base load or peak generation modes
- Gas turbines in Captive Power plants
- Gas or steam turbine prime movers
- Hydroelectric turbine applications
Properties
- ISO Viscosity Grade
- Typical Properties
Value Units Test Method / Conditions Air Release Time (at 50°C) 2 min ASTM D3427 Copper Strip Corrosion Rating (at 100°C, 3 h) 1B - ASTM D130 Density (at 15.6°C) 0.85 kg/I ASTM D4052 Emulsion Time (at 54°C, 3ml) 10 min ASTM D1401 Flash Point 228 °C ASTM D92 Foam (Sequence I, Tendency) 0 ml ASTM D892 Foam (Sequence II, Tendency) 0 ml ASTM D892 Foam (Sequence IIl, Tendency) 0 ml ASTM D892 Kinematic Viscosity (at 100°C) 5.5 mm²/s ASTM D445 Kinematic Viscosity (at 40°C) 30 mm²/s ASTM D445 Neutralization Number 0.1 mg KOH/g ASTM D974 Pour Point -30 °C ASTM D97 Rotating Pressure Vessel Oxidation Test 1000 min ASTM D2272 Turbine Oil Stability Test (Life to 2.0) 10000 mg KOH/g ASTM D943 Viscosity Index 117 - ASTM D2270