Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Tilley Product Number
- Industrial Additives Functions
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- Labeling Claims
- Industrial Additives Features
Applications & Uses
- Product Applications
- STEPANQUAT 200 is miscible with soft and hard water (400 ppm CaCO3) in all proportions, as well as with alcohol and acetone, in all proportions.
- STEPANQUAT 200 is insoluble in ether, benzene, petroleum and/or chloroform.
- STEPANQUAT 200, at the recommended use level, does not contribute to corrosion of metal compounds.
- STEPANQUAT 200 is compatible with other anionics, cationics, and nonionics at the proper pH range of 8 - 12.
- Product will lose activity at a pH less than 5.0 as well as in the presence of hydrogen peroxide at a pH of greater than 10.
Properties
- Color (Properties)
- Physical Form
- Soluble In
- Appearance
- Clear amber liquid
- Typical Properties
Value Units Test Method / Conditions Active Content (molecular weight 219) 78.5 % - Boiling Point 100.0 °C - Density 1.15 g/ml - Flash Point min. 94 °C PMCC pH 10.5 - - Volatile Organic Compounds 0 % -
Regulatory & Compliance
Safety & Health
- Health Effects Information
STEPANQUAT 200 is slightly toxic orally (LD50 >763 g/kg) and dermally (LD50 >2 g/kg) causes slight skin irritation and is corrosive to the eye. The product is not mutagenic.
Packaging & Availability
- Packaging Information
STEPANQUAT 200 is available in 55 gallon drums (227 kg), 275 gallon totes (1134 kg) and in bulk quantities.
Storage & Handling
- Storage Condition
- Gloves, protective clothing, safety goggles and face shield should be worn when handling STEPANQUAT 200.
- Avoid contact with the eyes, nose, or prolonged skin contact.
- Wash thoroughly after handling product.
- It is recommended that STEPANQUAT 200 be stored in sealed containers no lower in temperature than 10 °C (50 °F) or higher than 48.9 °C (120 °F) and kept in a cool, dry place. Avoid overheating or freezing.
- Bulk Storage Information: Vessels, pumps, pipes, transfer lines, and internal hairpin coil should be made of 316 stainless steel. Prolonged contact with brass, copper or aluminum piping, containers or equipment should be avoided.