Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
Formulated using an advanced lithium complex soap thickener Enables longer grease life at higher temperatures than possible with greases made with most other soap types.
Excellent EP and anti-wear properties Equipment protection and potential equipment life extension even in severe operating conditions.
Potent corrosion protection Guarding equipment against rust and corrosion in heavy-duty and automotive applications.
Excellent resistance to water washout and spray-off Uses new polymer technology. This enhances the product's already excellent adhesion tendency and water washout resistance. Ensures proper lubrication and protection even in hostile wet environments.
Certified against NLGI service classification GC-LB One grease for wheel bearings and chassis lubrication as demonstrated against all NLGI GC-LB performance tests.
Applications & Uses
- Markets
- Applications
- Application Area
- Applications
- Unirex EP 2 is an excellent multipurpose grease for heavy-duty service in both Automotive and Industrial applications. Its excellent water resistance and extreme pressure protection exceed the performance levels of conventional multi-purpose light-to-medium-duty greases.
- Unirex EP 2 exceeds the requirements of the ASTM D 4950 GC-LB grease classification for automotive wheel bearing and chassis applications.
- Unirex EP 2 is well-suited for general-purpose anti-friction bearings operating at high temperatures. In addition, its low oil bleed properties offer a distinct advantage where minimal leakage is critical.
Properties
- NLGI Grade
- Specifications
Value Units Test Method / Conditions Penetration (at 25°C, Worked) 280 - ASTM D 217 Dropping Point min. 260 °C ASTM D 2265 Viscosity (at 40°C) 220 - - Penetration (Change from 60x to 100,000x, 0.1 mm) 30 - ASTM D 217 Timken (OK Load) 60 - - Oxidation Stability (Pressure drop at 100 hr) 1 kPa ASTM D 942 Wheel Bearing Leakage 1.3 - - Four Ball Wear (Scar Diameter) 0.47 mm ASTM D 2266 Four Ball EP (Weld Load) 315 - ASTM D 2596 EMCOR (Rust Test, 20% SSW, Rating) 0 - ASTM D 6138 Water Spray-Off 30 - - Water Washout 2.1 - -
Regulatory & Compliance
- Quality Standards